Default Settings (Digital Panel) - Doosan V158TI Operation & Maintenance Manual

5. Digital Panel Manager
5.4.4 Default Settings
- It shows description about the default setting tab in the initial main screen.
※ End users can configure start button action time only.
Engine Model
Setting
⑨
No.
Select engine models
①
Calibrate battery values after applying 15V and 25V respectively
②
Configure starting reaction time when pressing the start button (1s to 3s)
③
Timer setting for Stop Solenoid is from 7 seconds to 15 seconds
④
Configure alarm action conditions against engine over speed and minimum battery
⑤
charging voltage
⑥ Configure engine stop conditions against engine over speed
Configure CAN communication speed
⑦
Configure criteria for starter off RPM (300 to 600RPM) when staring the engine
⑧
Monitor the engine conditions in real time
⑨
⑩ Show the current firmware version and sensor value mappings
Show the serial number of the product
⑪
HY-DP-MANUAL-001
①
②
③
④
[Fig. 5-19] Default Setting Screen
[Table 5-3] Descriptions of Default Settings
⑩
⑤
⑥
⑦
⑧
Default Setting
35
⑪