Mark up each individual item to help ensure
correct alignment during assembly.
- HX35 (V158TI)
Rotor balance
limits (Max.)
Turbine end
Compressor end
- HX50 (V188TI, V222TI)
Rotor balance
limits (Max.)
Turbine end
Compressor end
●
Place the bearing housing (4) on a bench
with the turbine end facing uppermost.
Fit the inner circlip (64) with the bevelled
edge facing upwards.
●
Lubricate the journal bearing (11) and
install into position.
Fit the outer circlip (64) with the bevelled
edge facing the bearing.
Turn the bearing housing over and repeat
the process.
Main parts maintenance
g.mm
oz. ins.
1.5
0.002
1.5
0.002
g.mm
oz. ins.
2.2
0.003
4.4
0.006
- 156 -
EDV2218130
EDV2218131