2) Center housing rotating assembly
3) Watercooled bearing housing (4)
Optionally this can have additional water
feed and drain plug fittings.
4) New compressor wheel lock nut (61)
Holset have introduced a new compressor
wheel lock nut which is to be all new WH1C/
E turbochargers. If you turbo is fitted with
the new nut, it indicated that this turbo-
charger may have been built using the core
balance process at point of manufacture
rather than the traditional rotor balance pro-
cess The new nut will also require a differ-
ent torque process when rebuilding the
turbo after service.
Caution :
Always use specified torque. Failure
to do so may result in turbocharger/
engine failure.
Torque value
New lock nut
Old lock nut
Main parts maintenance
Nm
Ib Ins
17
150
16
160
- 144 -
2
Old
EA7M4005
EA7M4063
New
EDV2218095