●
Do not use again the cartridge removed
after use.
●
Remove the oil filter head fixing bolts and
disassemble the filter head.
6.1.9. Cooling water pump
●
Loosen the various hose clamps for the
connections.
●
Remove the cooling water discharging pipe
and disassemble the thermostat.
●
Loosen the water pump fixing bolts and
detach the cooling water pump.
6.1.10. Starting motor
Loosen the starting motor fixing nuts and dis-
mantle the starting motor.
6.1.11. Fuel filter
This filter is change-over type, that is the ser-
vicing procedure is for the filter side requiring
to be shut off while the engine is running.
During continuous operation, the selector
lever should be placed in a position where
both filter halves are in operation.
- 67 -
Disassembly and assembly of major components
EFM2006I
EFM2007I
EFM2008I
EB2M2001