6.1.5. V-belt.
Loosen the belt tension adjusting bolts, and
remove the V-belt.
6.1.6. Alternator
Remove the supporting guide piece for install-
ing the alternator and the bracket bolts.
Disassemble the alternator.
6.1.7. Vibration damper
Remove the fixing bolts for crankshaft pulley in
reverse order of assembly and disassemble
the crankshaft pulley and vibration damper.
6.1.8. Oil filter assembly
This filter is change-over type, that is the ser-
vicing procedure is for the filter side requiring
to be shut off while the engine is running.
During continuous operation, the selector lever
should be placed in a position where both filter
halves are in operation.
●
Disassemble the oil filter cartridge using a
filter wrench.
Disassembly and assembly of major components
- 66 -
EFM2002I
EFM2003I
EFM2004I
EFM2010I