Doosan V158TI Operation & Maintenance Manual page 74

●
Disassemble the rubber hoses of the fuel
supply and discharge.
●
Remove the fuel filter fixing bolts and dis-
assemble the filter.
6.1.12. Injection pipe
●
Disassemble the injection pipe from the
nozzle holder and fuel injection pump.
●
Disassemble various fuel pipe and hose.
6.1.13. Oil cooler assembly
●
By removing the plug screw of cooling
water discharge port, the cooling water is
discharged.
●
By removing the cooler housing fixing bolts
and detach the oil cooler housing from the
cylinder block.
●
Remove the oil cooler cover fixing bolts
and disassemble the oil cooler.
Disassembly and assembly of major components - 68 -
EB2M3003
EFM2012I
EFM2012I