Doosan V158TI Operation & Maintenance Manual page 76

6.1.17. Intake manifold
●
Remove the manifold fixing bolts and
detach the intake manifold from the cylin-
der head.
6.1.18 Heat exchanger
●
Remove the hoses and the pipes.
●
Remove the cover bolts
●
Remove the 4 fixing bolts from the lower
plate.
●
Pull out the heat exchanger tube bundle.
●
Clean the tubes.
6.1.19. Flywheel housing cover
●
Detach the side cover.
●
Disassemble the flywheel housing cover.
6.1.20. Fuel injection pump
●
Remove the oil hoses for lubrication and
the fuel hoses.
●
Loosen the fixing bolts of fuel injection
pump and detach the fuel Injection pump.
Disassembly and assembly of major components - 70 -
EFM2016I
EFM2017I
EFM2018I
EFM2019S