Doosan V158TI Operation & Maintenance Manual page 154

●
Carefully remove and discard the piston
ring seal(s) (13).
- HX35(V158TI) : 1EA
- HX50(V180TI/V222TI) : 2EA
Caution :
Care should be taken not to score the
assembly turbine wheel shaft.
●
Remove the heat shield (38).
●
Place the bearing housing on a flat surface
and using circlip pliers, remove the insert
retaining ring (66).
●
Gently remove the oil seal plate (43) as fo
lows.
- HX35 : Using two flat nose pliers
Main parts maintenance - 148 -
EDV2218104
EDV2218105
EDV2218106
EDV2218107