Table of Contents
Advertisement
PROPER GROUNDING
Grounding
provides
resistance for electric current to reduce the
risk of electric shock.
CX614 is for use on a normal 110 volt
circuit. Make sure that the machine is
connected to an outlet having the same
configuration as the plug. If an adaptor plug
is used, it must be attached to the metal
screw
of
the
receptacle.
electrical
hazards,
electrician ensure that the line is properly
wired.
The drill press should be wired with a plug
having 3 prongs to fit a 3 prong grounded
receptacle as shown in figure-1. Do not
remove the grounding prong to fit it into a 2
pronged outlet.
Figure-1 110-Volts outlet for CX614
a
path
of
least
To
prevent
have
a
qualified
WARNING!
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician if you are in doubt as to
whether the outlet is properly grounded.
It is strongly recommended not to use
extension cords with your CX614. Always
try to position your machine close to the
power source so that you do not need to
use extension cords.
If you really find it necessary to use an
extension cord, make sure the extension
cord does not exceed 50-feet in length and
the cord is 14-gauge to prevent motor
damage.
7
Advertisement
Table of Contents
