Calibration And Settings - Volvo Penta D4 Series Operator's Manual

Calibration and Settings

Settings
My View
Neutral Beep
114
Settings Menu
Settings and calibrations are managed in the Settings
menu.
1 Navigate to the Settings menu.
2 Press
to open the settings menu.
3 Navigate backwards and forwards in the settings
menu by pressing
Return to the previous menu by pressing the button.
Hold the button down for more than 3 seconds to get
to the main menu.
My View
In formation shown in the main menu can be adapted
to suit personal preferences in My View.
1 Navigate from the settings menu to My View. Press
to get to the submenu.
2 Navigate through the menu using
available operating information.
3 Press
to add or remove information for display
in the main menu.
Neutral Beep
The neutral beep is an audible signal that sounds when
the control is in the neutral position.
The setting must be entered at each helm station.
1 Navigate to Neutral Beep in the settings menu.
2 Press
to switch the audible signal On or Off.
.
to see
47702599 12-2011