Volvo Penta D4 Series Operator's Manual page 45

47702599 12-2011
Engaging the low speed function
1 Move the lever to the neutral position.
2 Press the Low Speed button on the control or
on the helm station panel to activate the low speed
function.
An audible signal and the message "Lowspeed acti-
vated" (A) will be displayed on screen to confirm
that the function is on.
is shown on the screen if the low speed function
is active (B).
When the low speed function is engaged a delay may
occur when shifting.
Disengage the low speed function
1 Move the lever to the neutral position.
2 Press the Low Speed button on the control or
on the helm station panel to disengage the
low speed function.
Two audible signals confirm that the function is
switched off and the "Lowspeed deactivated"
(C)message is displayed on the screen.
Optional
43