Volvo Penta D4 Series Operator's Manual page 121

A
B
C
A Trim position being set
B Engine rpm
C Trim angle
P0001232
Defaults
47702599 12-2011
PTA Calibration
PTA (Power Trim Assistant) automatically adjusts the
trim angle to boat speed. The system has a basic set-
ting, but it is possible to set five different angles for five
different speeds.
On boats with more than one station and with several
displays it is enough to do the calibration on one dis-
play for it to be shown at all stations and on all displays.
For installations with several engines the calibration
needs to be made for each engine
1 Navigate from the settings menu to PTA Calibra-
tion. Press
2 Use
Pos 1.
Press
3 Proceed to PTA Pos 2.
Use
Press
4 Use
Press
5 Repeat steps 4 to 5 for Pos 3, Pos 4 and Pos 5.
6 To return to basic settings, select Defaults and
press
P0013204
Calibration and Settings
to get to the submenu.
to set the trim angle for idle, PTA
to confirm the setting.
to set the rpm.
to confirm the setting.
to set the trim angle.
to confirm the setting.
to confirm return to basic settings.
119