Settings - Volvo Penta D13 Operator's Manual

Instruments and Controls
34

Settings

Serial number and software version
In order to see the engine serial number and software
version installed go to the main menu.
Press the Enter button (2) and hold it down and press
the Page button (1) at the same time.
The system returns automatically to the main menu.
Backlighting
Panel backlighting is adjusted in the info menu.
Press the Enter button (2) and hold it down; adjust
backlighting with the up/down buttons.
Contrast is adjusted in the main menu. Press the Enter
button (2) and hold it down; adjust the contrast with the
up/down buttons.
Changing language
Setting the language the information on the screen will
be shown in. There are six languages to choose from.
1 Press the Enter button (2) and hold it down to reach
the info menu. Press the Page button (1).
2 Browse using the up/down buttons.
3 Press Enter (2) to select the language and close the
menu.
Setting password
The password consists of 1–4 numerals.
The default password is 0 on delivery.
1 Navigate to the Adjustments menu.
2 Browse to "Password" using the up/down buttons.
Press Enter (2) to confirm the selection.
3 Browse using the up/down buttons to "Enter
Password" where 0 is shown. Press Enter (2) to
confirm the selection.
4 Exit the menu by pressing Page (1).
The password gives full access to the MCU.
Parameters may only be changed by trained
personnel.
47710406 10-2018 © AB VOLVO PENTA