Volvo Penta D4 Series Operator's Manual page 16

Instruments and Controls
14
Docking Panel
When the boat is operated from a docking station
engines, can be stopped and started and messages
can be managed using the docking panel.
The joystick can be used for maneuvering when the
docking station is activated; refer to the Joy-
stick page 40 section for further information.
Activation
Activate the helm station by depressing the on/off but-
ton. A further pressure on the button locks the helm
station.
To switch off the function, hold the button down for 3
seconds.
Twin instalation
Both engines in a twin instalation must be running
before the docking station can be activated.
The helm station is inactive.
The helm station is active and the docking
function is switched on.
The helm station is locked.
Start/Stop
Press the STOP and START buttons to stop and start
all engines.
The circles above the engine symbols show which
engines are running. An empty circle means an engine
is running.
Contrast and backlighting
The button on the far right is used to adjust contrast
and panel backlighting. The button is also used to con-
firm fault messages.
Backlighting
Contrast
Press the button to adjust the contrast and the back-
lighting.
Use + and – to increase or reduce the contrast or back-
lighting.
Adjustments affect all screens in the system.
47702599 12-2011