Volvo Penta D4 Series Operator's Manual page 39

Hide thumbs Also See for D4 Series:
Table of Contents

Advertisement

47702599 12-2011
6
Neutral position. The symbol shows that the drive/
reverse gear is disengaged.
7
The warning triangle lights up if the system discov-
ers a fault; refer to Fault Handling page 55 for
information.
The warning triangle lights up on the same side as
the driveline with the indicated fault.
8 This function is not available.
9 TRIM ASSIST
The Power Trim Assistant, PTA, adjusts the trim
angel automatically according to engine speed
(rpm), see Power Trim Assistant page 33 for infor-
mation.
10 TRIM
Trim the drive out//in.
For twin engine installations the adjustment of the
drives are synchronized. For further information
see Instruments and Controls page 31.
Side-mounted control
1 TRIM
Trim the drive out//in.
For twin engine installations the adjustment of the
drives are synchronized.
For further information on Power Trim see Instru-
ments and Controls page 31.
2
Neutral position. The symbol shows that the drive/
reverse gear is disengaged.
The warning triangle lights up if the system discov-
ers a fault; refer to Fault Handling page 55 for
information.
This function is not available.
3 + / -
Fine tune the locked engine speed for tow mode
(4) or cruise control (5) by increasing (+) or reducing
(-) engine rpm.
4 TOW MODE
Accelerates the boat to a preset rpm.
Switch on toe mode by pressing the button.
Fine tune the locked engine speed by increasing (+)
or reducing (-) engine rpm with button (3).
5 CRUISE CONTROL (optional)
Switch on cruise control by pressing the button.
Fine tune the locked engine speed by increasing (+)
or reducing (-) engine rpm with button (3).
Instruments and Controls
37

Advertisement

Table of Contents
loading

Table of Contents