Otto Bock Skeo Instructions For Use Manual page 15

INFORMATION
Some liners are treated with the Skinguard Technology additive. Skinguard
Technology has an antibacterial effect and prevents the formation of
unpleasant odours.
Substances in sweat containing sulphur may cause discolouration. This
discolouration has no effect on the function or durability of the liner but
cannot be removed. Sulphur may enter sweat through food, for
example, protein products, cabbage, nuts, legumes and sulphured
products (e.g. dried fruit).
Discolouration of the liner does not justify customer complaint claims.
INFORMATION
► Liners that have already been worn generally feel softer than new
liners.
► Because of the relatively long drying times of Uneo liners, a spare liner
is recommended.
► Clean new liners before using for the first time.
INFORMATION
Derma Prevent can damage the outer and inner coating of Uneo liners.
6.1 Putting on and taking off the liner
Donning
INFORMATION
Wear the liner directly on the skin. Fabrics between the skin and the liner
can cause skin irritation.
If any allergic reaction occurs, immediately discontinue use and contact
your medical professional.
1) Check the liner for damage. If a pin is attached, also check the pin for
damage.
2) Roll up the liner and place it on the end of the residual limb.
NOTICE! Align a distal connecting element (e.g. pin, metal cap)
with the longitudinal axis of the residual limb.
3) Unroll the liner onto the residual limb so that it has no wrinkles or air
inclusions, without shifting the soft tissue.
15