Programming - Ricoh 1232 Series Operating Instructions Manual

Programming

If a destination is programmed in the
Quick Dial Table, you can just press
that Quick Dial key to dial.
Note
❒ Up to 400 destinations can be pro-
grammed. You can program up to
1,200 destinations when Fax Func-
tion Upgrade Unit is installed.
❒ The maximum number of digits
for a fax number may be less than
254 due to the settings for SUB,
SID, SEP, PWD, Space and Sub-ad-
dress.
Reference
See p.94 "Program/Change/De-
lete Menu", Facsimile Reference (op-
tion) <Advanced Features> .
Press [Dest. Management] ⇒ [Program
/Change/Delete Quick Dial].
A A A A
Select the Quick Dial key you
want to program.
Note
❒ If the key has been programmed
already, the contents are shown.
❒ Press [Change Title] to display
another title.
B B B B
Enter the receiver's name, and
then press [OK].
The name has been programmed.
Note
❒ You should program the name
of the receiver.
C C C C
Enter the facsimile numbers you
want to program with the number
keys or software keys.
Note
❒ You should program a facsimile
number.
❒ Press the { { { { Pause/Redial} } } } key for
"-" when you are entering the
facsimile numbers with the
number keys.
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key
and start again.
Quick Dial
3
39