Table of Contents
Advertisement
Registering
❒ Press [Adv. Features] to edit SUB,
SID, SEP, PWD, sub-address or
UUI. See p.35 "Advanced Fea-
tures", Facsimile Reference (op-
tion) <Advanced Features> .
❒ You can select a line type for
each destination when the op-
tional ISDN Unit or the optional
Extra G3 Interface Unit is in-
stalled. Press [Select Line] to se-
l e c t a l i n e t y p e . S e e p . 4 3
3
"Changing the Line Type", Fac-
simile Reference (option) <Ad-
vanced Features> .
D D D D
When programming each item,
select its key.
Programming/Changing Key
Display
A Press [Key Display].
B Enter a Key Display, and then
press [OK].
The Key Display which you
programmed is shown.
Reference
See "Entering Text" in the
General Settings Guide.
Selecting a title
A Press [Select Title].
40
B Select the title you want to pro-
gram, and then press [OK].
Note
❒ You can program the same
destination in [Title 1] , [Title 2]
and [Title 3].
❒ When [Freq.] is selected for
one title, [Freq.] is selected for
all titles. See p.95 "Program-
ming Title of the Quick Dial
Table", Facsimile Reference
(option) <Advanced Features> .
Selecting a Fax Header
A Press [Select Fax Header].
B Select [1st Name] or [2nd Name] ,
and then press [OK].
Programming Label Insertion
A Press [Label Insertion].
B Select [ON] or [OFF].
Note
❒ If you select [OFF] or if you
want to insert only the re-
ceiver name, go to step E.
C Press [Change] at the right side
of the second or third line.
D Select the standard message to
be stamped at the second or
third line, and then press [OK].
E Press [OK].
Programming the International
Transmission Mode
A Press [International TX Mode].
B Select [ON] or [OFF], and then
press [OK].
Advertisement
Table of Contents
