Introduction; Preparing For Installation - Raven SmarTrax Installation Manual

I ntroduction
CHAPTER
C h a p t e r 2
2
Congratulations on your purchase of the SmarTrax system! This system is designed to provide cutting-edge,
hands-free steering of the machine via Global Positioning System (GPS) coordinates.
This manual applies to the following machines:
MAKE: Case IH
MODEL: Patriot 4430
YEAR: 2012
Case IH Patriot 4430
FIGURE 1.

Preparing for Installation

Before installing the SmarTrax system, park the machine where the ground is level, clean, and dry. Turn off the
machine and leave it turned off for the duration of the installation process. Bleed pressure from the hydraulic
system by loosening the hydraulic fittings slowly, where applicable.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
Manual No. 016-5032-082 Rev. A 3