Raven SmarTrax Installation Manual page 19

Installed Right Steering Hose
FIGURE 9.
Locate and disconnect the machine's right steering hose from the right steering cylinder.
8.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) in the open steering cylinder port.
9.
Connect the machine's right steering hose to the opposite end of the installed tee fitting.
10.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-659) on the 90° end of the installed tee
11.
fitting.
Connect the straight end of the installed hydraulic hose to Port B of the SmarTrax valve (P/N 334-0003-
12.
088).
Manual No. 016-5032-082 Rev. A
Right
Steering
Hose
Left
Steering
Hose
Hydraulic System Installation
15