Chapter 5
Next, line up the mounting tabs on the node to the holes on the back wall of the cab.
2.
Node Installed
FIGURE 5.
Connect the rectangular 12 pin connector on the node cable (P/N 115-4001-045) for Viper Pro/Envizio Pro
3.
to the machine cable harness.
Node Cable Connection
FIGURE 6.
Connect the large, rectangular connectors to the SmarTrax node.
4.
Connect your receiver or source of DGPS to the connector labeled 'DGPS' on the node adapter cable.
5.
Connect the console providing machine guidance to the remaining DB-9 connector.
6.
20
Apache AS 20 Series SmarTrax Installation Manual
Node Cable and
Machine Harness
Connection