Install The Phoenix 200 Antenna (If Applicable); Complete The Smartrax System Installation - Raven SmarTrax Installation Manual

Install the Phoenix 200 Antenna (If Applicable)

Phoenix 200 Antenna Installed
FIGURE 12.
Install the Phoenix 200 antenna (P/N 063-0172-719) on the existing mounting plate on the cab roof.
1.
GPS Connections
FIGURE 13.
Connect the Phoenix 200 to Case harness cable (P/N 115-4001-027) between the antenna and the GPS
2.
roof connection.
Connect the CASE GPS connection and the DGPS IN connection from the node harness (P/N 115-4001-
3.
127) cable together.

Complete the SmarTrax System Installation

Reinstall the back panel of the instructional seat compartment.
1.
Reinstall the fan assembly.
2.
Replace the storage tub.
3.
Manual No. 016-5032-015 Rev. C
Cab Component Installation
15