Startup Procedures; Verify The Smartrax System Installation - Raven SmarTrax Installation Manual

Buhler versatile row crop r2 series 250, 280, and 305 (including ultrasteer) and 260, 290, and 310 series

Hide thumbs Also See for SmarTrax:

Table of Contents

CHAPTER

Turn on the machine.

Double-check all fitting and hose connections to ensure that:

•

Hoses are not rubbing on or interfering with moving parts.

•

Hydraulic fluid is not leaking from the system.

Turn the machine's wheels fully from side to side repeatedly to remove air from the hydraulic system.

Note:

During the SmarTrax system installation, whenever the hydraulic system is purged for

maintenance, or when fittings are loosened or disconnected, air is introduced into the lines of the

hydraulic system. If air pockets are present, the wheels may not move consistently when the

steering wheel is turned.

Continue turning the wheels until they move steadily and smoothly when the steering wheel is turned.

Access the System Diagnostic screen by selecting the MACHINE TEST option on the Machine Type screen

and turn the wheels using the Raven console.

Note:

If there are issues with the SmarTrax system, turn off the machine and correct them immediately.

For additional assistance, refer to the SmarTrax and SmartSteer Calibration & Operation Manual

(P/N 016-0171-277) or contact your local Raven dealer.

P/N 016-5031-002 Rev. C

S tartup Procedures

C h a p t e r 6

WARNING

Do not use hands to check for leaks. Hydraulic

fluid under pressure can penetrate the skin and

cause serious injury or death.

Table of Contents