Raven SmarTrax Installation Manual page 38
Buhler versatile row crop r2 series 250, 280, and 305 (including ultrasteer) and 260, 290, and 310 series
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
Chapter 5
Valve Harness Routed Out of Cab
FIGURE 13.
Route the valve harness through the access plate in the back of the cab and toward the SmarTrax valve
3.
(P/N 334-0003-088).
Note:
It may be necessary to create a notch in the access plate to accommodate the valve harness and
power cable.
Valve Harness Connected to SmarTrax Valve
FIGURE 14.
Connect the VALVE connector to the open 4-pin port of the SmarTrax valve.
4.
Connect the TRANSDUCER connector to the pressure transducer (P/N 422-0000-086) installed in Port PS
5.
of the SmarTrax valve.
34
Buhler Versatile Row Crop R2 Series 250-310 SmarTrax™ Installation Manual
Advertisement
Table of Contents
