Chapter 4
Axle Mounting Bracket Installed
FIGURE 11.
Insert the machine's axle housing bolt into the hole in the tapered end of the axle mounting bracket (P/N
2.
107-0172-150).
Install a 5/8" split lock washer (P/N 313-1000-045) on the end of the axle housing bolt.
3.
Install the axle mounting bracket and axle housing bolt in the hole of the front axle differential housing.
4.
Note:
The lock washer will space the axle mounting bracket away from the axle differential housing.
M10 Bolt Inserted into Rod Mounting Bracket
FIGURE 12.
Insert the M10 x 1.5 x 60 mm metric hex bolt (P/N 311-0070-025) into the rod mounting bracket (P/N 107-
5.
0172-030).
24
Buhler Versatile Row Crop R2 Series 250-310 SmarTrax™ Installation Manual