Raven SmarTrax Installation Manual page 20

Chapter 3
Identify the machine's pressure and tank lines.
1.
Disconnect the machine's pressure hose from the steel line.
2.
Machine's Pressure Hose Installed
FIGURE 8.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) on the end of the steering line.
3.
Connect the machine's pressure hose to the opposite end of the installed tee fitting.
4.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-903) on the 90° end of the installed tee
5.
fitting.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax valve.
6.
Disconnect the machine's tank hose from the steel line.
7.
Machine's Tank Hose Installed
FIGURE 9.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) on the end of the tank line.
8.
Connect the machine's tank hose to the opposite end of the installed tee fitting.
9.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-903) on the 90° end of the installed tee
10.
fitting.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax valve.
11.
16 Buhler Versatile Row Crop R2 Series 250-310 SmarTrax™ Installation Manual