Install The Left And Right Steering Hoses - Raven SmarTrax Installation Manual

Chapter 3
Mount the SmarTrax valve to the holes in the cab support using two 3/8"-16 UNC x 1-1/4" hex bolts (P/N
3.
311-0054-106), two 3/8" flat washers (P/N 313-2300-013), and two 3/8"-16 zinc flanged lock nuts (P/N 312-
1001-164).

Install the Left and Right Steering Hoses

Left Steering Hose Connections
FIGURE 5.
Locate and disconnect the left steering hose from the base-end of the hydraulic steering cylinder.
1.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) in the open port of the left
2.
steering cylinder.
Connect the machine's left steering hose to the opposite end of the installed tee fitting.
3.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-318) on the 90° end of the installed tee
4.
fitting.
Connect the straight end of the installed hydraulic hose on the fitting installed in Port A of the SmarTrax
5.
valve (P/N 334-0003-090).
Note:
It may be necessary to install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on Port
A of the SmarTrax valve to achieve the connection.
Right Steering Hose Connections
FIGURE 6.
12
Miller Condor GC Series & New Holland Guardian R Series SmarTrax™ Installation Manual