Starting A Job; Engaging Vsn - Raven VSN Operation Manual

VSN OPERATION WIDGETS
The following widgets are available for use with the VSN system to quickly change modes, monitor system
operations, and engage the system from the field computer during field operations.
OPERATION MODE WIDGETS
The Operation Mode widget must be added to the guidance screen to allow the operator to change modes
during a field operation.
VSN Operation Modes
TABLE 2.
Icon
Operation: VSN Operation Widgets
GPS Mode. Guidance is performed via GPS guidance points only.
Vision. Guidance is performed via the VSN camera only. GPS corrections are neither
utilized for guidance nor available as a fall-back solution. Line acquire must be
performed manually. When the solution quality falls below the minimum threshold
the steering system will disengage.
Vision+. Guidance is performed via a combination of GPS and the VSN camera. This
mode can be utilized for line acquire via GPS with the system switching to the VSN
camera when the machine is aligned and near the guidance line.
This mode will also fall back to GPS guidance if the solution quality falls below the
minimum threshold. The system will then return to VSN guidance automatically
when the solution quality is above the minimum threshold.
NOTE: It is recommended to use Last Pass when using Vision+ mode.
Description
OPERATION
15