Diagnostic Trouble Codes (Dtcs) - Raven VSN Operation Manual

CHAPTER 6
6. Select Accept to install the software.
NOTE: Do not shutdown the system or field computer during the software update.
FIGURE 7. Software Installation in Progress

DIAGNOSTIC TROUBLE CODES (DTCS)

The Diagnostic Trouble Code tab displays lists of both active and previous (inactive) diagnostic trouble codes
(DTCs) that occur during VSN system operation. Active DTCs must be fixed before the VSN system can be enabled
for guidance and steering operation. Once a DTC has been corrected, the code moves to the inactive DTC code
list. Refer to Figure 8 on page 30 for an example of DTCs and DTC summaries.
FIGURE 8. Diagnostic Trouble Codes Screen
Diagnostic
Trouble Code
(DTC)
Selecting Clear deletes the inactive DTCs from the Inactive DTC error log. For a complete list of VSN DTCs, please
visit:
http://ravenprecision.force.com/knowledgebase/articles/Tech_Tip/RS1-Lights-and-Diagnostic-Codes/
Select the Log Error button to record diagnostic CAN data.
30
DTC Summary
VSN Operation Manual