Table of Contents
Advertisement
Replacing the display bezel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in
After Working Inside Your
home page at dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with non-touchscreen display.
1
Connect the logo-board cable to the logo board.
2
Slide the display-board cables to their respective connectors on the logo board and press down the latches to secure the
cables.
3
Turn the display bezel over.
4
Align the display bezel with the display back-cover and gently snap the display bezel into place.
Post-requisites
1
Replace the
display
assembly.
2
Follow the procedure from step 5 to step 9 in "Replacing the
3
Follow the procedure from step 3 to step 7 in "Replacing the
4
Replace the
base
panel.
64
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
palm
rest".
solid-state
drive" .
Advertisement
Table of Contents
