Fcc Radio Frequency Interference Statement; About This Manual - Advantech BB-MESP211T User Manual

Modbus Gateway – BB-MESP211T

FCC RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which the user will be required to correct the interference at his own expense. Any
changes or modifications not expressly approved by the manufacturer could void the user's authority to operate
the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does
not exceed the Class B limits for radio noise emission from digital apparatus set out in the Radio Interference
Regulation of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de classe B prescrites dans le Règlement sur le brouillage radioélectrique publié par le
ministère des Communications du Canada.

ABOUT THIS MANUAL

 2019 Advantech B+B SmartWorx. All rights reserved. Information in this manual is subject to change without
notice and does not represent a commitment on the part of Advantech B+B SmartWorx. Advantech B+B
SmartWorx assumes no responsibility for errors that may appear in this document. Advantech B+B SmartWorx
shall not be liable for incidental or consequential damages resulting from the furnishing, performance or use of
this manual.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photography, recording, or any information storage and retrieval system without written
consent.
Other brands or product names used in this manual may be registered trademarks and the property of their
respective owners. The use of trademarks or other designations in this publication is for reference purposes only
and does not constitute an endorsement by the trademark holder.
6