CONNECTING BB-MESP211T TO A NETWORK
Network Connection (10BaseT/100BaseTX)
When connecting the BB-MESP211T Modbus Gateway with a 10BaseT/100BaseTX network connection (RJ45
connector), a standard network cable is connected from the Modbus Gateway to a network drop. PCs configuring
and/or communicating with the Modbus Gateway are also connected to the network.
CONFIGURATION CONNECTIONS
The BB-MESP211T Modbus Gateway can be configured over the network or via a serial port.
INSTALLING MODBUS GATEWAY MANAGER SOFTWARE
1. The Modbus Gateway Manager Software is contained on the CD that is packaged with the product.
Insert the CD into your CD ROM drive. The software should automatically begin the installation
process. If AUTO RUN is disabled on your computer, open the CD drive and double-click on the
executable file.
a. The following screen will be displayed on your computer.
b. Click "Next." The License Agreement Screen will be displayed on your computer.
Modbus Gateway Manager Installation Welcome Screen
13
Modbus Gateway – BB-MESP211T