Table of Contents
Advertisement
To exit Console Mode, press and hold the Reset switch for two seconds. Saving your configuration will
also take you out of Console Mode. The LEDs go back to their normal states when the device resumes
normal operation.
OPERATIONAL CONNECTIONS
USING THE BB-MESP211T MODBUS GATEWAY IN DIRECT IP MODE
A Direct IP connection allows applications using TCP/IP socket programs to communicate with COM ports on the
Modbus Gateway. In this type of application, the Modbus Gateway is configured as a TCP server. The socket
program running on the PC establishes a communication connection with the Modbus Gateway. Data is sent
directly to and from the serial port on the server.
To set up a Direct IP Mode connection:
1. Connect the Modbus Gateway to the network and a Modbus network as described in
previous sections.
2. Configure the Modbus Gateway with the appropriate network settings (used for the web
interface).
3. Configure your software application with the appropriate IP address and port number to
communicate with the Modbus network(s).
Modbus Gateway – BB-MESP211T
Direct IP Connection
41
Advertisement
Table of Contents
