Table of Contents
Advertisement
Haes Technologies Ltd, Unit 3 Horton Industrial Park, West Drayton, UB7 8JD
Model Number
Esento Marine 8 zone conventional panel ESEN-8MAR
Esento Marine 12 zone conventional panel ESEN-12MAR
Control and indicating equipment for fire detection and fire alarm systems for buildings.
Power supply equipment for fire detection and fire alarm systems for buildings.
Electrical installations in ships, special features, control and instrumentation.
Electrical and electronic installations in ships, electromagnetic compatibility.
PLEASE READ THIS MANUAL BEFORE HANDLING THE EQUIPMENT AND
THIS PARTICULARLY APPLIES TO THE PRECAUTIONS NECESSARY TO AVOID
IMPORTANT SAFETY NOTES
The panel is safe to operate provided it has been installed in compliance with the manufacturer's instructions
and used in accordance with this manual.
Hazardous voltages are present inside the panel—DO NOT open it unless you are qualified and authorised
to do so. There is no need to open the panel's enclosure except to carry out commissioning, maintenance
and remedial work. This work must only be carried out by competent service personnel who are fully
conversant with the contents of the panel's installation manual and have the necessary skills for maintaining
this equipment.
This fire alarm system requires periodic checks as specified in BS 5839 Part 1 It is the responsibility of the
system user to ensure it is regularly serviced and maintained in good working order.
Disclaimer
No responsibility can be accepted by the manufacturer or distributors of this fire alarm panel for any
misinterpretation of an instruction or guidance note or for the compliance of the system as a whole. The
manufacturer's policy is one of continuous improvement and we reserve the right to make changes to
product specifications at our discretion and without prior notice. E & O E.
European Standard EN54-2 : 1997 + A1 : 2006
Provided Options (with requirements):
Output to fire alarm devices, dependency type 'A', test condition
European Standard EN54-4 : 1997 + A1 : 2002 + A2 : 2006
European Standard BS IEC60092-504 : 2001
European Standard BS IEC60533 : 1999
IMPORTANT NOTE
OBSERVE ALL ADVICE GIVEN IN IT
E.S.D
MED Ref No.
0832-MED-1086
0832-MED-1086
ATTENTION
Hide quick links:
Advertisement
Table of Contents
