Parameter Setting - Toshiba B-EP2DL Series System Mode Manual

3. ONLINE MODE

3.7 Parameter Setting

This parameter setting used to following setting.
LCD Message
LCD DENSITY LCD density setting
FONT CODE Character code setting
ZERO FONT Font 0 setting
LCD LCD language setting
CODE Control code setting
EURO CODE EURO font code setting
MAXI CODE MaxiCode specification setting
AUTO OFF Auto power-off timing setting
SLEEP Power save mode timing setting
LCD OFF LCD backlight off timing setting
AUTO HD CHK Automatic print head check for broken dots
setting
HEAD CHECK Print head check for broken dots after cover
close setting
HEAD ERR PRT Resume printing after broken dots error setting
FEED CHECK Feed to top of feed after cover close setting
BEEP VOL Beep volume setting
XML XML setting
For details, refer to System Mode (for service personnel or administrator).
Operation Example
ON LINE
[PAUSE]
PAUSE
[PAUSE]
<1>RESET
[PAUSE] or [FEED]
<3>PARAMETER SET
[POWER]
LCD DENSITY 0
[POWER]
FONT CODE PC-850
[POWER]
ZERO FONT 0
[POWER]
LCD ENGLISH
[POWER]
Continued to the next page.
Description
The printer is turned on, standing by, or printing.
Press the [PAUSE] key.
"PAUSE" is displayed.
Press and hold the [PAUSE] key for at least 3 seconds.
The reset menu is displayed.
When "<1>PARAMETER SET" appears, press the [PAUSE] or [FEED] keys until the
following display appears.
System mode menu display (Parameter setting)
Press the [POWER] key.
LCD density setting
Press the [POWER] key.
Character code setting
Press the [POWER] key.
Font 0 setting
Press the [POWER] key.
LCD language setting
Press the [POWER] key.
0
PC-850
0 (without slash)
ENGLISH
AUTO (automatic selection)
B0
TYPE1
120min.
3sec.
3sec.
OFF (An automatic print head check for broken
dots is not performed.)
OFF (A print head check for broken dots is not
performed after the cover is closed.)
OFF (The printer does not resume printing after a
broken dots error occurs.)
OFF (A feed to the top of feed is not performed.)
1
OFF
3- 10
EO13-33005
3.7 Parameter Setting
Default Setting