Toshiba B-EP2DL Series System Mode Manual page 43

4. SYSTEM MODE (For Service Persons and System Administrators)
Self-test Result Items
1) Maintenance counter values
Item
TOTAL FEED
TOTAL PRINT
FEED
FEED (1 to 4)
PRINT
PRINT (1 to 4)
232C ERR
SYSTEM ERR
Maintenance Counter
Total label distance covered
Label distance covered
Label print distance
RS-232C hardware error
count
System error count
Description
Total label distance covered
(cannot be cleared)
Total label print distance covered
(cannot be cleared)
Current label distance covered
Previous label distance covered
1 to 4
Current label print distance
Previous label print distance
1 to 4
RS-232C hardware error count
System error count
Counts whenever the paper feed motor is driven, for example, to feed,
print, or exit a label. (Also counts during a reverse feed operation.)
When the power is turned off, a label distance of up to 50.0 cm may be
rounded down and backed up.
When the label distance covered reaches the maximum value, the
maintenance counter must be cleared. Otherwise, the total label distance
covered cannot be updated.
Counts while printing. (Counting is not performed during a paper exit or
reverse feed operation.)
When the power is turned off, a print distance of 5.5 m or less is rounded
down and backed up.
Counts when a parity error, overrun error, or framing error occurs.
* When data of several bytes is transmitted continuously, counting is
performed per byte.
Counts when a No.20 system error.
4- 9
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0 to 255
0 to 15
Count Conditions
EO13-33005
(Revision Date: Nov. 7, 2008)
4.2 Diagnostic Test
Range