Operation Panel - Toshiba B-EP2DL Series System Mode Manual

1. INTRODUCTION

1.2 Operation Panel

The figure below illustrates the Operation Panel and key functions.
[POWER]
The LCD Message Display shows messages in alphanumeric characters and symbols to indicate the
printer's status. Up to 16 characters in 1 line can be displayed.
There are two LEDs on the Operation Panel.
LED
STATUS
(Red, Green, Orange)
POWER
STATUS
CHARGE
CHARGE LED
STATUS LED
STATUS LED displays the state of the printer below.
• Printer power, ON or OFF
• Communication status of printer
• Printer error
• Battery level
• Strip wait state
Illumination pattern
• Power OFF/Charging in power OFF state: OFF Lights out
Power ON
Battery level 3 or more
In idle state Green/ON
In communication/Strip wait state
Error Red/Blink
Battery level 2 (near-low battery state)
In idle state Orange/ON
In communication/Strip wait state
Error Red/Blink
Battery level 1 (low battery state)
LCD Message Display
FEED
Illuminates when...
Green/Blink
Orange /Blink
Red/ON
1- 2
1.2 Operation Panel
[FEED]
PAUSE [PAUSE]
EO13-33005