Basic Expansion Mode - Toshiba B-EP2DL Series System Mode Manual

3. ONLINE MODE

3.10 BASIC Expansion Mode

It is possible to execute the BASIC expansion mode program in BASIC expansion mode under the following
conditions:
• The BASIC expansion mode program has already been loaded.
• The BASIC enable setting mode is selected.
The basic expansion mode ends when the basic expansion program is exited.
• How to Perform BASIC Expansion
ON LINE
[PAUSE]
PAUSE
[PAUSE]
<1>RESET
[PAUSE] or [FEED]
<6>EXPAND MODE
[POWER]
BASIC program is
executed.
NOTES:
1. The BASIC expansion mode ends when the BASIC expansion program is exited.
2. When the [POWER] key is pressed without the BASIC expansion mode program loaded, the display
does not change from the BASIC expansion mode menu, "<6>EXPAND MODE".
3. For details of the BASIC expansion mode, refer to the section, "Startup of System Mode Program" in
"the BASIC Interpreter Specification".
The printer is turned on, standing by, or printing.
Press the [PAUSE] key.
"PAUSE" is displayed.
Press and hold the [PAUSE] key for at least 3 seconds.
"RESET" is displayed.
When "<1>PARAMETER SET" appears, press the [PAUSE] or [FEED] keys until the
following display appears.
"<6>EXPAND MODE" is displayed.
Press the [POWER] key.
After the BASIC expansion mode is started, LCD display and operations depend on the
BASIC expansion mode program.
3- 16
EO13-33005
310 BASIC Expansion Mode