Toshiba B-EP2DL Series System Mode Manual page 32

3. ONLINE MODE
Operation Example
ON LINE
[PAUSE]
PAUSE
[PAUSE]
<1>RESET
[PAUSE] or [FEED]
<7>I/F SETTING
[POWER]
<IrDA>
[PAUSE]
<USB>
[PAUSE]
<RS-232C>
[PAUSE]
<BLUETOOTH>
[PAUSE]
<WLAN>
[FEED] and [PAUSE]
<7>I/F SETTING
[POWER]
<1>RESET
[PAUSE]
ON LINE
The printer is turned on, standing by, or printing.
Press the [PAUSE] key.
"PAUSE" is displayed.
Press and hold the [PAUSE] key for at least 3 seconds.
The reset menu is displayed.
When "<1>PARAMETER SET" appears, press the [PAUSE] or [FEED] keys until the
following display appears.
System mode menu display (Interface setting)
Press the [POWER] key.
IrDA setting
Press the [POWER] key.
USB setting
Press the [POWER] key.
RS-232C setting
Press the [POWER] key.
Bluetooth setting (Displayed only for the models with the Bluetooth module)
Press the [POWER] key.
Wireless LAN enable/disable setting Displayed only for the models with the wireless LAN
module
While holding down the [FEED] and [PAUSE] keys.
System mode menu display (Interface setting)
Press and hold the [POWER] key for at least 3 seconds.
The reset menu is displayed.
Press the [POWER] key.
The printer returns to the same state as when the power is turned off and on again.
3- 18
EO13-33005
3.11 Interface Setting