Toshiba B-EP2DL Series System Mode Manual page 86

4. SYSTEM MODE (For Service Persons and System Administrators)
(2) Assembly process test print
<5>TEST PRINT
[POWER]
PRINT CONDITION
[PAUSE] x 6
FACTORY TEST
[PAUSE]
AUTO PRINT(TRAN)
[PAUSE]
AUTO PRINT(REFL)
[PAUSE]
PROCESS PRINT
[FEED] and [PAUSE]
<5>TEST PRINT
System mode menu display (Test Print)
Test print condition parameter setting mode
Press the [PAUSE] key six times.
Assembly process test line print mode
Assembly process automatic print mode
(transmissive sensor)
Assembly process automatic print mode
(reflective sensor)
Assembly process test pattern print mode
While holding down the [FEED] key, press the [PAUSE] key.
System mode menu display (Test Print)
4- 52
EO13-33005
4.6 Test Print