Lcd Check - Toshiba B-EP2DL Series System Mode Manual

4. SYSTEM MODE (For Service Persons and System Administrators)

4.2.4 LCD Check

This function is used to check for the LCD.
Power OFF
[FEED] and [Power] Keys
<0>SHUTDOWN
[PAUSE]
<1>DIAGNOSTIC
[POWER]
MAINTENANCE CONT
[PAUSE]
AUTO DIAGNOSTIC
[PAUSE]
HEAD CHECK
[PAUSE]
LED CHECK
[PAUSE]
LCD CHECK
[POWER]
<1>DIAGNOSTIC
Note:When the [PAUSE] key is pressed with all LCD dots turned on, the printer stops under such condition.
Pressing the [PAUSE] key again clears the status and the system mode menu is displayed.
While holding down the [FEED] key, press the [POWER] key to turn the
power on.
System mode menu display (Shutdown)
System mode menu display (Diagnostic)
Print mode for maintenance counter values and various parameter values
Automatic self-test mode
Print head check for broken dots mode
LED check mode
LCD check mode
Start of LCD check
All dots and backlight turn off for 3seconds.
LCD display
All dots turn on for 3 seconds. (Note)
System mode menu display (Diagnostic)
4- 6
EO13-33005
4.2 Diagnostic Test