System: Dst & Ntp - KGuard Security Easy Link PLUS Series User Manual

DST stands for Daylight Savings Time.
Stands for Network Time Protocol. This feature allows you to synchronize the date and time automatically on the DVR over Internet. Therefore the DVR needs to be connected
to the Internet.
Easy Link PLUS Series DVR
30
System: DST & NTP
• DST: Enable if Daylight Saving Time (DST) is observed in your country.
• Time Offset: Select the amount of time to offset for DST.
• Daylight Saving Time:
- Start Time: Enter the Start Time by selecting the month, week, day, and time.
- End Time: Enter the End Time by selecting the month, week, day, and time.
• NTP: Enable if you want the DVR to update the date and time automatically.
• Server Address: Select the NTP (Network Time Protocol) server.
• Time Zone: Select the Time Zone in your location.
• Update Now: Click here to update the system date and time.