Network: Email & Email Schedule - KGuard Security Easy Link PLUS Series User Manual

Please complete these settings if you want to receive the system notifications on your e-mail when a motion is detected, HDD becomes full, HDD is in error state, or Video Loss occurs.
For the convenience, you can create an email schedule. Define when and what type of events you want to be notified by email.
Easy Link PLUS Series DVR
18
Network: Email & Email Schedule
• Email: Enable this feature.
• SSL: Enable if your e-mail server requires the SSL verification. If you are not sure, please consult
your e-mail service provider. For example, if you are using Gmail then this option should be
enabled.
• SMTP Port: Enter the SMTP port of your e-mail server. For example, if you are using Gmail, the
SMTP port is 465.
• SMTP Server: Enter the SMTP server address of your email.
• Sender:
• Sender
• Receiver: Enter the email address where you want to receive the event notifications from the
DVR.
• Interval: Configure the length of the time interval between the notification emails from the DVR.
NOTE:
message to your inbox. If you received the test email, it means the configuration parameters are correct.
The color codes on email schedule have the following meanings:
• Green: Slot for Motion.
• Red: Slot for Exception (HDD full, HDD error, or Video Loss).
Enter your email address.
Password: Enter the password of your email.
To make sure all settings are correct, click Test Email. The system sends an automated email