Table of Contents
Advertisement
Use the Web Client to remotely access your DVR at anytime via a PC. Before you access the Web Client, you need to ensure that the network settings of the DVR are
configured properly. The most convenient and easiest way is if you have set the DVR a static IP address (please
need to open the web browser on your PC and type in the static IP address you have set on the DVR. However, if the IP address of the DVR is assigned by a DHCP server
"Network: Network" on page
16), then it means that each time you reboot the DVR, the IP address changes. In this case, ask if your ISP can provide you a static IP address.
If not, then configure the DDNS service. See the network settings in
the UPnP is configured in the DVR and router, or the manual port forwarding is completed in the router.
Logging In
To access the Web Client, do the following:
1)
Launch the web browser (Internet Explorer) on your PC and enter the DVR static IP address or DDNS domain name (Host Name) you have set on DVR in the URL box.
The following IP address is an example only.
NOTE:
The user login page opens as shown.
2)
Enter the User Name and Password.
3)
Click Login.
Easy Link PLUS Series DVR
34
Remote Access via Web Client
"Network: Network" on page 16
The default DVR user name is "admin" and
default password is "123456".
see
"Network: Network" on page
and
"Network: DDNS & FTP" on page 19.
16). It means you only
(see
Also, please make sure
Advertisement
Table of Contents
