Table of Contents
Advertisement
Main Menu > System > General > DST, NTP & Main Menu > System > Log
DST stands for Daylight Savings Time.
NTP stands for Network Time Protocol. This feature allows you to synchronize the date and time automatically on the DVR over Internet. Therefore the DVR needs to be
connected to the Internet.
This menu allows you to view a list of events, presented in chronological order.
Hybrid DVR (HD Series)
34
• DST:
Enable if Daylight Saving Time (DST) is observed in your country.
• Time
Offset: Select the amount of time to offset for DST.
• Daylight Saving
Time: Choose to set the daylight saving time in weeks or in days.
• Start Time/End
Time: Set the start time and end time for daylight saving.
• NTP:
Enable if you want the DVR to update the date and time automatically.
• Server
Address: Select the NTP (Network Time Protocol) server.
• Time
Zone: Select the Time Zone in your location.
• Update
Now: Click here to update the system date and time.
- To search for a log, enter the start time/end time to the respective fields and click Search.
- To display log details, double-click on the item.
- To backup a log entry, connect an external USB disk to the DVR, click on the log event and click
Backup.
• Log Type:
Select the log type.
• Start Time/End Time:
Specify the start and end date/time of the logs you want to review and/or
save on an external USB storage device. Click Search. The logs will be listed on the table.
Hide quick links:
Advertisement
Table of Contents
