Table of Contents
Advertisement
Main Menu > Parameter > Network > Email & Email Schedule
This menu allows you to configure email settings. Please complete these settings if you want to receive the system notifications on your email when a motion is detected,
HDD becomes full, HDD is in error state, or Video Loss occurs.
This menu allows you to create email schedule. Define when and what type of events you want to be notified by email.
• Email:
Enable this feature.
•
Encryption: Select the encryption for your email provider. If you are not sure set Auto to allow the
DVR automatically detect the correct encryption method.
• SMTP
Port: Enter the SMTP port of your email server. For example, if you are using Gmail, the SMTP
port is 465.
• SMTP
Server: Enter the SMTP server address of your email.
• User
Name: Enter the email user name for your account.
•
Password: Enter the password of your email.
• Sender:
Enter your email address.
•
Receiver1/Receiver2/Receiver3: Enter the email address(s) where you want to receive the event
notifications from the DVR.
•
Interval: Configure the length of the time interval between the notification emails from the DVR.
To make sure all settings are correct, click Test Email. The system sends an automated email
NOTE:
message to your inbox. If you received the test email, it means the configuration parameters are correct.
The color codes on email schedule have the following meanings:
•
Green: Slot for Motion.
•
Red: Slot for Exception (HDD full, HDD error, or Video Loss).
•
White: Slot for PIR camera or Smoke detector camera.
• Automatic Event Sending is
Off: A time slot marked black means that there is no automatic email
sending scheduled.
4MP Hybrid DVR
23
Advertisement
Table of Contents
