Table of Contents
Advertisement
Main Menu > Parameter > Network > Email & Email Schedule
This menu allows you to configure email settings. Please complete these settings if you want to receive the system notifications on your email when a motion is detected,
HDD becomes full, HDD is in error state, or Video Loss occurs.
This menu allows you to create email schedule. Define when and what type of events you want to be notified by email.
• Email:
Enable this feature.
•
SSL: Enable if your email server requires the SSL verification. If you are not sure, please consult
your email service provider. For example, if you are using Gmail then this option should be
enabled.
• SMTP
Port: Enter the SMTP port of your email server. For example, if you are using Gmail, the
SMTP port is 465.
• SMTP
Server: Enter the SMTP server address of your email.
• Sender:
Enter your email address.
• Sender
Password: Enter the password of your email.
•
Receiver: Enter the email address where you want to receive the event notifications from the
DVR.
•
Interval: Configure the length of the time interval between the notification emails from the DVR.
To make sure all settings are correct, click Test Email. The system sends an automated email
NOTE:
message to your inbox. If you received the test email, it means the configuration parameters are correct.
The color codes on email schedule have the following meanings:
•
Green: Slot for Motion.
•
Red: Slot for Exception (HDD full, HDD error, or Video Loss).
•
White: Slot for PIR camera or Smoke detector camera.
• Automatic Event Sending is
Off: A time slot marked black means that there is no automatic email
sending scheduled.
Hybrid DVR (HD Series)
23
Hide quick links:
Advertisement
Table of Contents
