Axis 2N Access Unit Configuration Manual page 93

5.4.5 Web Server
You can configure your
integrated web server. Use the secured HTTPS protocol for communication between
the browser and 2N Access Unit
and password. The default login name and password are
recommend you to change the default password as soon as possible.
The Web Server function is used by the following
HTTP commands for switch control, refer to the Switches subsection.
1.
Event.HttpTrigger in
2.
The unsecured HTTP protocol can be used for these special communication cases.
List of Parameters
Device Name– set the device name to be displayed in the right upper corner of
the web interface, login window and other applications if available (2N
®
Manager 2N ,
Web Interface Language – set the default language for administration web
server login. Use the upper toolbar buttons to change the language temporarily.
Password – set the intercom access password. Press
The 8-character password must include one lower-case letter, one upper-case
letter and one digit at least.
2N TELEKOMUNIKACE a.s., www.2n.cz
2N Access Unit
. Having accessed the intercom, enter the login name
2N Automation
IP Network Scanner
using a standard browser with access to the
admin
2N Access Unit
; refer to the respective manual.
, etc).
a 2n respectively. We
functions too:
to change the password.
93/128
®
IP