Axis 2N Access Unit Configuration Manual page 11
Hide thumbs
Also See for 2N Access Unit:
- User manual (117 pages) ,
- Installation manual (78 pages) ,
- Configuration manual (12 pages)
Table of Contents
Advertisement
Profile deactivated
This tone signals profile deactivation. Refer to the Profile subsection for
the deactivation code settings.
Internal application launched
The internal application of the
2N Access Unit
is launched upon the
2N
Access Unit
power up or restart. A successful launch is signaled by this
tone combination.
Connected to LAN, IP address received
2N® Access Unit logs in upon the internal application launch. A successful
LAN login is signalled by this tone combination.
Disconnected from LAN, IP address lost
This tone combination signals UTP cable disconnection from the 2N
Access Unit
.
Default reset of network parameters
Upon power up, a 30 s timeout is set for the default reset code entering.
Refer to the Device Configuration subsection in the 2N Access Unit
Installation Manual for details.
2N TELEKOMUNIKACE a.s., www.2n.cz
11/128
Advertisement
Table of Contents
Need help?
Do you have a question about the 2N Access Unit and is the answer not in the manual?