Axis 2N Access Unit Configuration Manual page 62

Note
The modules can also be configured via the text row with a list of
parameters
semicolons. At present, just a few of these parameters are available. The
other parameters are not public as they are rather experimental and can
be modified in the future.
Note
Module Name has to be unique.
Unnameable modules can be addressed via ext <module_position>.
Backlight Brightness
This tab helps you control the backlight level of name tags, buttons and brightness of
signalling LEDs.
Note
The brightness parameters affect the function, power consumption and
general appearance of your device. Extremely high name tag and button
backlight values may, if the ambient light level is low, dazzle the persons
standing in front of the
power consumption of the device. An excessively low LED brightness
value, on the other hand, may, if the intercom is placed in direct sun,
result in a lower LED on/off contrast and potential LED state
identification problems.
2N TELEKOMUNIKACE a.s., www.2n.cz
(parameter_name=parameter_value)
2N Access Unit
separated
and, in general, increase the
with
62/128